TUFF KOTE Patching Compound for exterior applications

Description

TUFF KOTE Patching Compound for exterior applications : it bridges exterior cracks and problem areas with a flexible, waterproof, permanent patch.

This is a natural agricultural oil-base compound that won’t crack or split, won’t dry out like other repair compounds. Its biobased formula waterproofs instantly, sticks to problem surfaces, withstands building stress and movement. Fast and easy to use. Just brush on, apply fabric and recoat to permanently seal and waterproof all exterior surfaces.

Tuff-kote combined with the TuffGlass Fabric permanently repairs roofs, gutters, windowsills, flashings, skylights, dormers, chimneys, foundations, siding, copings, garage doors, basements, parapets, porches, pillars, fencing, stucco, fascia boards, and anywhere buildings are subject to stress and movement, moisture and weathering.

Product Features

• Listed in the USDA BioPreferredSM product catalog.
• Permanent repair compound for all exterior surfaces. 100% waterproof formula.
• Outstanding adhesion, flexibility and toughness.
• Withstands temperature extremes, won’t shrink or crack.
• Resistant to mold, mildew and ultraviolet light attack.
• Use with Tuffglass Fabric to bridge, patch and seal exterior building surfaces.
• Standard color: light gray. Can be painted when dry with any exterior paint. Can be stored outside, impervious to freezing

Recommended for: masonry, concrete, concrete block, brick, stucco, slate, tile, foam, wood, fiberglass, weathered asphalt, drywall, cement board. Not suitable for rubber or EPDM systems, or any unsound surface. Prime all metal surfaces with metal primer before using. Always do a test area prior to application to check for compatibility and soundness. Tuff-kote is not intended for use as a crack or hole filler or to replace rotted or missing wood.

Approximate Coverage Rates Per Gallon (4L)

Average coverage rate: 30-35 sq. ft. per gallon / Coverage per Lineal Foot of Tuffglass Fabric Width 70-80’ 5.5” 30-35’ 12” [1 gal (4L) covers 3 – 3,5 m² with thickness from 0,5 to 0,7mm]

NOTE: Lineal coverage varies with size of fabric used, method of application and surface. Allow twice as much material when coating the bottom of gutters. Coverage rates are given in good faith by TKO Industrial Coatings and should be used as an estimate only. Actual coverage rates will vary due to the individual nature of each application. Therefore, TKO Industrial Coatings is not responsible for any variance between estimated and actual coverage rates

Available in : 1 gal  and  1/4 gal